The decoration process is divided into many areas, such as living room decoration, bedroom decoration, kitchen decoration, bathroom decoration, etc., in so many areas, living room decoration is the most important, because it is our rest, chat, meeting place, so in the decoration of the living room, the items placed on the very important, today to introduce you to the living room sofa how to place? you need to consider those question before you buy cheap furniture in uk.
People describe the placement of the sofa in the living room as a harbour, a harbour can only be prosperous with more water, so can the placement of the sofa, so how to place the sofa in the living room? What are the taboos of sofa placement in the living room?
☑ When buying a sofa, the colour should be the gatekeeper and must be used according to the owner's fortune. If the colour is too bright, it will cause dizziness and confusion to the family.
☑ When buying a sofa, you should decide on the size of the living room and the shape of the sofa should be divided into single, double, long and round sofas. This is because too many sofas in the living room will have an impact on the harmony of the family.
☑ The cheap sofas should not be placed with its back to the door, otherwise it will form a dichotomy with the door, which is a major taboo in living room decoration. ☑ The sofa must be placed at the wealthy position, from a professional feng shui layout point of view, it should be placed at the position of prosperity. As the sofa is a place for the whole family to move around and rest, the chi must be strong.
☑ When placing the sofa, there must be a support behind it, i.e. a solid wall, as we often say. If there is no support behind the sofa, it will make people lack a sense of security.
☑ When placing the sofa, don't put toys and paintings against the wall, and make sure the sofa is clean so as to ensure that your family can reduce stress.
☑ There are many types of sofas, you must gather them together to form a small fixed area, so that you can hide the wind and gather air to ensure the prosperity of people.
☑ The sofa should be placed in such a way that it avoids the beams, otherwise it will affect the relationship between the couple and the physical and mental health of the elderly and children. As well as cheap beds.
Sofa purchase points
Because the domestic industry certainly does not have a lunatic who does this with wooden frames. ) How to buy a sofa? The eight taboo inner frame manufacturing process requirements for purchasing a sofa: 1. Make sure that the stressed parts are free of scars, and the width of other parts does not exceed one-third of the wooden slats. 2. The base is reinforced with triangular wood. 3. The slats are planed on all sides. Smooth, so as not to scratch the fabric. 4. The splint must meet the national standard. The formaldehyde content should not exceed 5. The symmetry deviation is within 5 mm. 6. Use X-shaped nails and a 64mm steam nail gun. 7. Use 30mm thick wood for the identification method of the foot. You can identify the degree of firmness by shaking the wooden frame a few times by hand. This is a relatively standardized sofa wooden frame, which can be compared with those required by the craftsmanship, and it is more in line with the rules. Bottom: The cushion is placed on the wooden frame. The hollow part of the wooden frame should be supported by serpentine springs or elastic bands, covered with a thin layer of sponge, and then wrapped in velvet. It is best not to use a serpentine spring to replace the elastic band in the case of nailing the elastic band on the inner frame, because the noise is difficult to eliminate over time. But some manufacturers have to use snake springs in order to be so cheap. In fact, the sitting feeling with springs is better. But it is easier to age. It is not impossible to use a serpentine spring, but it is more difficult to handle. The correct way is to choose high-quality springs, and use clips and leather wraps to solve the noise problem. The elastic band and the installation part have been seen above. There are two types of elastic bands for seat cushions and backrests. As shown in the figure, the green one is for seat cushions. It is better to pull the cushion with a strong force. The interval between the elastic bands is 12cm. If it is too large, it is easy to break holes. . Many factories don't pay much attention to this. But he has a certain influence on sitting feeling and service life. How to buy a sofa? Eight taboos when buying a sofa. Now listen carefully, and talk about the most important issue. Cushions and backrests are a part of a lot of moisture. The cushion is made of sponge or spring. (The price of the sponge is slightly higher.) First of all, the spring has a better sitting feeling than the sponge, but try not to use the spring, because the spring on the seat bag is easily aging or damaged. If there is no seat bag (leather sofas generally do not have a seat bag), springs can be used. The quality of the sponge varies greatly, and the price is also very different. A good sofa sponge may cost thousands, but the same sofa with a bad sponge may be less than 300 yuan. What is the difference? The two technical indicators of sponge are: density and rebound index. High density and high quality are good, and the price is high. 1. The sponge with poor elasticity and comfort is not sufficiently dense, so it either sinks into the sofa when sitting on it, or it looks like it is sitting on wood without elasticity. The sofa does not feel like a sofa. The jargon is called sitting feeling very dead. A good sponge has sufficient density and elasticity, and has a springy feel. 2. Sponge with good use time has good elasticity, quick recovery and not easy to damage. The poor sponge sank after sitting for a year or two and broke. 3. Environmental protection. Some sofa manufacturers use sponges produced by small factories, and the quality and environmental protection cannot pass the barrier. Money-saving tips for sofa factories: 1. Use cheap sponge produced by a small factory, the price is only half of the famous factory 2. Use scraps to cut into broken sponges and fill them into the cushion and backrest 3. Use poor materials for the bottom (such as: A cotton ) 4. Use recycled sponge, which is a waste of broken sponge and glued (glue contains a lot of formaldehyde, students who are decorating know), looking at the colorful, it is actually a health killer, and there is nothing Elastic, manufacturers use it as the bottom material of the cushion. Note: The seat cushion cannot be used with a density lower than 25, which is the lowest blue super. The backrest cannot be used with a density lower than 20, which is the lowest pink super. To make a sofa, the cushions should be layered, because all the sponges of one type are often not effective. The bottom is mainly used for support. You can use a low-density but high-hardness sponge (of course, the price is also lower). To achieve a sitting feeling, a high-density, high-elastic sponge should be used for the surface layer (the price is very high, and one inch is required. One hundred yuan, to ensure comfort, at least 4 inches thick). The sofas produced by some manufacturers look very large, but the cushions are very thin. If the cushion is not more than 4 inches, which is 10 cm, it is best not to buy it. It will definitely not be very comfortable. It doesn't work anymore. This is a cost-saving trick for manufacturers, and laymen will never see it or understand it. Also, the connection between the sponges must be made of environmentally friendly glue, otherwise formaldehyde will be released. If you want to buy a sofa, you must remember to open the cloth cover and take a look. Under the strong light, you can probably see some famous ones. Feel the elasticity of other sponges. It’s best to pinch them with your nails. The ones with nail marks are definitely not high-elastic sponges! |
收藏
推
噓