Pay attention to cleaning the lens and guide rails every day, and clean the sundries on the worktable; lens cleaning method: when cleaning the lens, absolute ethanol or 98% alcohol must be used as the cleaning solution, and a small amount of absorbent cotton should be gently dipped in the alcohol, and then lightly applied to the lens. laser equipment manufacturer，Scrub lightly. Finally, wipe the lens with a dry cotton cloth to make the lens bright and transparent; (note that scrubbing too hard will easily wipe off the coating on the lens, which may damage the lens)
The cleaning method of the guide rail: first remove the stains and processing sundries on the guide rail, then add a little lubricating oil on the guide rail, move the guide rail, so that the clear lubricating oil is evenly distributed on the guide rail. (Be careful not to use thicker lubricating oil (butter). This kind of lubricating oil adhering to the guide rail can easily cause the sticking and twisting of machining chips and dust, thereby damaging the slider and the guide rail.)
like：
| 