Due to the action of injection pressure, the plastic mold is deformed and dislocated, and excessive pressure is applied to the sliding part of the plastic mold, mould supplier，resulting in occlusion. Why do plastic molds slip?
1. The sliding part of the plastic mold is insufficiently lubricated; 2. The rigidity of the sliding part of the plastic mold is insufficient; 3. The sliding part of the mold is deformed and dislocated.
Methods to prevent plastic mold occlusion:
1. The rigidity of the plastic mold should be large. Note that the screws of each part of the mold should be tightened; 2. The sliding part should be quenched to make the sliding part have sufficient hardness; 3. The sliding part is made of different steel and copper materials, 4. The sliding part uses molybdenum disulfide and Lubricants such as copper powder.
like：
| 